New Home Ventilation NZ: Plug & Go Systems for HRV, DVS, Smartvent, i-Vent & Moisture Master by Supercell Ltd

New Zealand's Most Complete Home Ventilation Replacement Solution

Whether you have an HRV, DVS, Smartvent, i-Vent, or Moisture Master system that's failing, underperforming, or simply due for an upgrade — Supercell Ltd has engineered the smartest replacement solution on the New Zealand market.

The Supervent Plug & Go system is a fully loaded, drop-in home ventilation replacement that connects straight into your existing ducting. No new ductwork. No major installation. Just world-class ventilation performance, installed in minutes.

And if you're building new or starting fresh, our flexible ducting kits and complete ventilation systems make it easy to design and install a high-performance setup from scratch.

Compatible With All Major NZ Ventilation Systems

The Supervent Plug & Go is engineered for drop-in compatibility across New Zealand's most common home ventilation brands:

• HRV — Heat Recovery Ventilation replacement, same ducting, new performance
• DVS — Driven Ventilation Systems replacement, plug straight into the existing ceiling power point
• Smartvent — Drop-in compatible, no ductwork changes required
• i-Vent — Seamless replacement using existing infrastructure
• Moisture Master — Upgrade your moisture control with a superior fan and controller

No matter which system you currently have, the Supervent Plug & Go slots in where your old unit was — saving you the cost of a full system replacement.

World-Class EBM Papst Fan — Because Fan Quality Is Everything

At the core of every Supervent Plug & Go system is a German-engineered EBM Papst centrifugal fan — the same technology used in industrial and commercial ventilation worldwide. This is not a budget component. EBM Papst fans deliver:

• High airflow efficiency — more air moved per watt of power
• Whisper-quiet operation — no disruptive noise day or night
• Long operational life — engineered to last, not to be replaced again in a few years
• Reliable moisture and air quality control — consistent performance in NZ's variable climate

When it comes to home ventilation, the fan is the engine. Supercell Ltd doesn't compromise on it.

Everything Included — Only Labour Required

The Supervent Plug & Go arrives fully loaded. Every component is pre-fitted and ready to connect into your existing ducting:

• ✅ EBM Papst centrifugal fan in PVC round housing
• ✅ Military-grade webbing hanging straps with buckle
• ✅ Supervent control panel
• ✅ 10m 5-core 1.0mm comms cable to controller
• ✅ 6m power cable with male 3-pin plug (fits existing DVS/HRV ceiling power point)
• ✅ 5m thermostat
• ✅ Supercell bag filter or box filter
• ✅ Roll of PVC tape

The power plug connects directly into your existing ceiling power point. Pull the comms cable down the wall using the old cable as a guide, connect the controller — and you're done. Only labour required.

New Installation? Flexible Ducting Kits Available

Building a new home or installing ventilation from scratch? Supercell Ltd also supplies flexible ventilation ducting kits and complete system components, including:

• Flexible insulated ducting in standard NZ sizes
• Inline fan systems for new builds and extensions
• Ducting connectors, bends, and accessories
• Complete ventilation system design support

Whether you're retrofitting an existing home or specifying ventilation for a new build, Supercell Ltd has the components and expertise to get it right.

Add Air Conditioning Integration

Modern NZ homes increasingly use air conditioning for year-round comfort. Supercell Ltd's flexible ducting systems are compatible with ducted air conditioning setups, allowing you to:

• Distribute conditioned air through existing ductwork
  
• Reduce energy costs with efficient airflow management
• Maintain healthy indoor air quality alongside temperature control

Talk to us about designing for ventilation and air conditioning ducting solution for your home.

Why New Zealand Homeowners Choose Supercell Ltd

• No other supplier offers this — the Supervent Plug & Go is a uniquely complete, ready-to-install replacement system
• Premium components — EBM Papst fan quality you can trust for years
• Massive savings — avoid paying thousands for a full system replacement
• Fast installation — most replacements completed in a single visit
• NZ-based — Supercell Ltd understands New Zealand homes, climate, and ventilation needs
• Landlord and rental compliant — meets Healthy Homes ventilation standards

Healthy Homes Compliance for Landlords

New Zealand's Healthy Homes Standards require rental properties to have adequate ventilation. The Supervent Plug & Go is a fast, cost-effective way to restore ventilation — without the expense of a full system replacement.

Ready to Upgrade Your Home Ventilation?

Whether you're replacing an HRV, DVS, Smartvent, i-Vent, or Moisture Master — or installing a brand new ventilation system with flexible ducting — Supercell Ltd has the solution.

Save hundreds. Breathe better. Install today.

→ Shop Supervent Plug & Go Systems & Ducting Kits