DVS, Smartvent & HRV Replacement Systems NZ: Supervent Plug & Go
Has your DVS, Smartvent or HRV ventilation system stopped working, become unreliable or developed a controller fault? Before committing to a completely new installation, explore whether a Supervent Plug & Go replacement system from Supercell Ltd is right for your home.
Supervent Plug & Go offers a practical replacement route for compatible installations, allowing suitable existing ducting to be retained. Rather than assuming everything needs to be replaced, start by finding out which parts of your current setup can still do the job.
What is a Plug & Go ventilation replacement?
A Plug & Go replacement replaces the main ventilation equipment and controls while connecting to compatible existing ducting. Supercell Ltd offers a Supervent replacement for DVS and Smartvent installations, plus a separate replacement designed for HRV installations.
These kits include a fan assembly, Supervent control panel, controller communications cable, power lead with a three-pin plug, thermostat, filter and installation accessories. The correct kit depends on your existing system and its connections.
Replacing a DVS or Smartvent system
If your DVS or Smartvent system is due for replacement, the Supervent Plug & Go DVS / Smartvent Replacement System is an option to discuss with Supercell Ltd.
This kit includes a round PVC housing with an EBM Papst centrifugal fan, hanging straps, a Supervent control panel, a 10-metre controller communications cable, a six-metre power lead with a three-pin plug, a five-metre thermostat, a Supercell bag filter and PVC tape.
Check your model, duct connections, power arrangement and controller cable route before ordering. The product is offered for DVS and Smartvent replacement applications, but suitability still needs to be confirmed for your particular installation.
Replacing an HRV system
For an ageing or faulty HRV installation, explore the Supervent Plug & Go HRV ventilation replacement fan system.
This kit includes a steel fan box with an EBM Papst centrifugal fan, hanging straps, a Supervent control panel, a 10-metre controller communications cable, a six-metre power lead with a three-pin plug, a five-metre thermostat, a Supercell Deep Pleat box filter and PVC tape.
A blank touchscreen or a fan that will not run does not automatically mean the entire system needs replacing. Have the fault assessed first so you can compare a repair with a suitable replacement.
Can you keep your existing ducting?
In a compatible installation, retaining existing ducting is one of the main attractions of a Plug & Go replacement. It can reduce the amount of equipment that needs changing and avoid unnecessary replacement of usable components.
However, existing ducting should be checked for size, condition, insulation, damage and suitability for the replacement unit. Crushed, disconnected or deteriorated ducting may need attention. Outlet layout and airflow requirements also matter, so do not assume every existing installation is a direct fit.
Does Plug & Go mean there is no installation work?
No. The kits are supplied with a plug-in power lead, but the fan assembly still needs to be safely positioned and secured, the ducting connected, and the supplied controller and communications cable installed. Do not assume your existing controller or cable can be reused.
Confirm that the existing power point is suitable and accessible. Roof spaces can present electrical, access and fall hazards. Use a suitably qualified installer, and have any mains electrical alterations completed by a licensed electrician. Never modify wiring or attempt to hardwire a plug-in kit yourself.
Should you repair or replace your ventilation system?
A repair may be worth considering when the fault is isolated and the rest of the equipment is in good condition. A replacement may be more practical when equipment is ageing, faults keep returning or suitable repair parts are difficult to obtain.
Compare the total cost of the repair with the correctly specified replacement and installation. Keeping suitable existing ducting may make replacement more attractive, but the best choice depends on the condition of your system and what your home needs.
Find the right solution with Supercell Ltd
Make Supercell Ltd your first stop for help with DVS, Smartvent and HRV ventilation problems. From exploring repairs to selecting a Supervent Plug & Go replacement, we can help you work towards a solution that suits your existing setup and budget.
Email info@supercell.co.nz with your system brand and model, a description of the problem, and any photos you can safely take without opening equipment or entering an unsafe roof space. Confirm compatibility before ordering so you choose the right kit first time.
Ready to explore your options? View the DVS / Smartvent Plug & Go replacement or the HRV Plug & Go replacement, and contact Supercell Ltd for help choosing.
Prev Post