DVS Fan Replacement Made Easy: The Supervent Plug & Go System for Only $1,222

Is Your DVS Fan Failing? Here's the Smarter, Cheaper Fix

If you've been told you need to replace your entire DVS home ventilation system, stop — there's a much better option. The Supervent Plug & Go DVS Replacement System by Supercell Ltd lets you swap out your old DVS fan motor for just $1,222 NZD, saving you thousands compared to a full system replacement.

No complex installation. No expensive contractors. Just drop it in and breathe better air — today.

Why New Zealand Homeowners Choose the Supervent Plug & Go

The Supervent Plug & Go is engineered specifically to replace DVS fan motors with zero fuss. Here's what makes it stand out:

• World-class EBM Papst centrifugal fan motor — the same trusted motor used in premium ventilation systems globally. This is the most critical component of any ventilation system, and we don't compromise.
• Military-grade hanging straps with cam buckles — quick, safe, and secure ceiling mounting without the guesswork.
• Drop-in ducting compatibility — fits straight into your existing DVS ceiling ducting. No modifications needed.
• Plug-in power connection — the 5m power cable with a standard 3-pin plug connects directly to your existing DVS ceiling power point.
• Numbered interconnect cable — the 10m 5-core comms cable is numbered for easy, mistake-free connection to your wall controller.

Everything Included — No Hidden Extras

The Supervent Plug & Go comes as a complete kit. Here's exactly what's in the box:

• PVC round housing
• EBM Papst centrifugal fan motor (fitted)
• Military webbing hanging straps with buckle
• 1 × Supervent control panel
• 1 × 10m 5-core 1.0mm comms cable to controller
• 1 × 5m power cable with male 3-pin plug
• 1 × 5m thermostat
• 1 × Supercell bag filter
• 1 × roll PVC tape

Everything you need is included. Your electrician or HVAC contractor won't need to source any additional parts.

DIY or Professional Install — Your Choice

The Supervent Plug & Go is designed to be installed quickly by:

• A confident DIYer comfortable working in ceiling spaces
• Any registered electrician
• Any HVAC contractor

Installation time is minimal. Pull the comms cable down the wall using the old DVS cable as a mouse, connect the numbered cable to the wall controller, plug in the power cord, and you're done. Most installs are completed in a fraction of the time of a full system replacement.

What Problems Does It Solve?

A failing DVS fan leads to a cascade of home health issues. The Supervent Plug & Go directly addresses:

• Excess moisture and condensation — reducing mould risk and protecting your home's structure
• Stale, stuffy air — continuously cycling fresh, filtered air through your home
• High power bills — the efficient EBM Papst motor uses less energy than older fan motors
• Poor indoor air quality — the included bag filter captures airborne particles before they circulate

Save Thousands vs. a Full System Replacement

A full DVS system replacement can cost $3,000–$6,000+ including parts and labour. The Supervent Plug & Go delivers the same core performance upgrade — a new, high-quality fan motor with full controls — for just $1,222 NZD. That's a saving of thousands, with no compromise on air quality or reliability.

Ready to Replace Your DVS Fan?

The Supervent Plug & Go DVS Replacement System is in stock now and ships across New Zealand. Visit www.supercell.co.nz to order, or contact us if you have questions about compatibility with your existing DVS setup.

Breathe better air. Save thousands. Install today.