supercellnz
  • Home
  • Supervent
  • Store
    • filters

      • HRV
      • DVS
      • AMS
      • Super Vent
      • Moisture Master
      • Sayr
      • Smartvent
      • I-Vent
    • ventilation system

      • Home Ventilation System

      insulation

      • Ceiling
      • Underfloor
      • Wall insulation
    • heat pumps

      • Browse All
      • GREE WEKA
      • GREE KEA AI
      • GREE KINGFISHER
      • GREE BORA
      • Mitsubishi heat pumps
      • Portable
    • accessories

      • HVAC Cleaners
      • Diffusers and Ducting
      • Nitrile single use gloves
      • Duct joiners
      • y-branch & Splitters
      • Cavius Fire Alarms
      • water filters
    • package deals

      • Browse All
  • Blog
  • Refund & Return Policy
  • Contact
  • replacement fans motors
  • Plug & Go Replacement fan systems
    1
There are 1 item in your cart
  • HRV JANUS Compatible filter Generation 2 F8 - Janus x 1 filter / Yellow / F8 deep pleat
    HRV JANUS Compatible filter Generation 2 F8
    Size: Janus x 1 filter Color: Yellow Style: F8 deep pleat
    $59.00 x 1

Subtotal $59.00

View cart Check Out

Forgot your password?

Create account

  • Home
  • Supervent
  • Store
    • - filters

      • -- HRV
      • -- DVS
      • -- AMS
      • -- Super Vent
      • -- Moisture Master
      • -- Sayr
      • -- Smartvent
      • -- I-Vent
    • - ventilation system

      • -- Home Ventilation System

      - insulation

      • -- Ceiling
      • -- Underfloor
      • -- Wall insulation
    • - heat pumps

      • -- Browse All
      • -- GREE WEKA
      • -- GREE KEA AI
      • -- GREE KINGFISHER
      • -- GREE BORA
      • -- Mitsubishi heat pumps
      • -- Portable
    • - accessories

      • -- HVAC Cleaners
      • -- Diffusers and Ducting
      • -- Nitrile single use gloves
      • -- Duct joiners
      • -- y-branch & Splitters
      • -- Cavius Fire Alarms
      • -- water filters
    • - package deals

      • -- Browse All
  • Blog
  • Refund & Return Policy
  • Contact
  • replacement fans motors
  • Plug & Go Replacement fan systems
Home HRV filter replacements / Bathroom Ventilation NZ: Extraction Fans & Supply Air Guide

Bathroom Ventilation NZ: Extraction Fans & Supply Air Guide

November 12, 2026 / Super Cell / 0 comments

A steamy bathroom needs more than a fan that makes a noise. Effective bathroom ventilation depends on moving moisture-laden air out, allowing replacement air in, and choosing components that work together. If you are comparing bathroom extraction fans in NZ or planning a supply ventilation upgrade, start by understanding those two different jobs.

This guide introduces Super Cell’s inline fans, Supervent supply ventilation, insulated ducting and ceiling diffusers, with product photos and direct links to help you explore the range.

Bathroom extraction vs supply ventilation: what is the difference?

Extraction ventilation takes humid air away from the bathroom and discharges it outdoors through a suitable duct and external outlet. It targets moisture where it is produced, such as during a shower.

Supply ventilation introduces air into rooms through a separate system. The air source depends on the system design: some systems draw from a roof space, while others use an outdoor intake. A roof-space supply system is not the same as a dedicated outdoor fresh-air system, and neither should be confused with bathroom extraction.

For a bathroom project, think about both the exhaust path and the replacement-air path. Do not assume that adding a whole-home supply system removes the need for a dedicated bathroom extraction arrangement.

Explore Super Cell’s bathroom and ventilation fan range

Plug & Go 150mm Inline Fan System

Plug & Go 150mm inline fan system with controller, cables and hanging straps

This system has 150mm inlet and outlet connections. Its listed package includes a low-profile fan housing, EBM Papst fan, mounting straps, cables, controller, F7 Generation 1 filter and PVC tape. The product is listed for bathroom, laundry and whole-home ventilation applications.

Before ordering, confirm the intended airflow direction, control arrangement and suitability for your extraction or supply application. A plug-in connection does not remove the need to check safe positioning, access and the installation requirements.

View the Plug & Go 150mm Inline Fan System →

150mm Low Profile Fan System

Black 150mm low-profile inline ventilation fan housing

Working with limited ceiling space? This low-profile option has 150mm inlet and outlet connections and a listed maximum airflow of 420 m³/hr. The product page identifies bathroom, laundry and home ventilation applications.

Maximum airflow is not a promise of the airflow at your bathroom grille. Duct length, bends, fittings and the external outlet all influence the installed result. Have your installer assess the complete airflow path rather than choosing on the headline number alone.

Explore the 150mm Low Profile Fan System →

In-Line Fan 200mm Round AC

Round inline AC ventilation fan with 200mm duct connections

This round inline fan has 200mm inlet and outlet connections and a listed maximum airflow of 720 m³/hr. It is an option to investigate for a ventilation design using 200mm ducting, subject to the application and installation requirements.

A larger connection size is not automatically the right upgrade for every bathroom. Check the available space, existing duct diameter, system resistance, controls and noise expectations before selecting a fan.

View the 200mm Round AC In-Line Fan →

Supply ventilation for the rest of your home

Supervent Ventilation System: 3 outlets

Supervent three-outlet ventilation system product graphic with filter, fan and controller

The Supervent three-outlet system brings together a fan, controller, filter, ducting and diffusers. Its product description explains temperature-based control of air introduced from the attic. It is a supply ventilation option to discuss when considering airflow beyond a single bathroom.

Keep the roles separate: the bathroom extraction duct carries damp air outdoors, while the supply system distributes air according to its design. Ask for advice on outlet locations and the suitability of the roof-space air source for your home.

Explore the Supervent 3-Outlet Ventilation System →

Ducting and diffusers: the parts that complete the airflow path

Insulated flexible ventilation ducting

Super Cell silver insulated flexible ducting shown in a 3m by 150mm product graphic

Super Cell’s 3-metre insulated flexible ducting is a supporting component to consider when planning a ventilation run. Select the appropriate diameter and confirm suitability for the air temperature, moisture exposure and route involved.

Plan a direct route where practical, avoid crushing the duct, and minimise unnecessary sharp bends. Ask your installer how the duct should be supported, joined and managed for condensation in your particular installation.

Shop 3-Metre Insulated Flexible Ventilation Ducting →

Manual ceiling diffusers

White round manual ceiling diffuser for ventilation and air conditioning

A ceiling diffuser is the visible room outlet in many supply ventilation systems. This manual diffuser range uses spring clips for fitting. Check the selected size and intended application before ordering. A diffuser alone does not move air, and a supply outlet should not automatically be treated as a bathroom extraction grille.

Browse Manual Ventilation Diffusers →

How to choose a bathroom ventilation setup

  1. Identify the job. Are you removing shower moisture, improving whole-home supply airflow, or replacing an existing fan?
  2. Record your existing equipment. Note the fan model, duct diameter, controller and available installation space. Take clear photos if you need help matching components.
  3. Check the full route. For extraction, identify where the duct will discharge outdoors. Do not terminate bathroom exhaust in the roof space.
  4. Allow for replacement air. Have the installer check how air will enter the bathroom while extraction is running.
  5. Match performance to the installation. Consider duct resistance, room use, controls and noise, not just maximum airflow.
  6. Confirm installation suitability. Follow the manufacturer’s instructions and use a qualified installer for electrical work and wet-area positioning.

Why is the bathroom still steamy when the fan is running?

A running motor does not necessarily mean effective extraction. Possible causes include a dirty grille, restricted replacement air, a crushed or disconnected duct, an unsuitable duct route, or a fan that is not matched to the system resistance. Persistent condensation may also involve cold surfaces or other moisture sources.

Start with safely accessible visual checks and cleaning in line with the manufacturer’s instructions. Isolate equipment as instructed before maintenance, and leave inaccessible ductwork or electrical investigation to a qualified professional. If the problem continues, have the installed airflow assessed before buying a replacement.

Bathroom extraction and supply ventilation FAQs

Can a whole-home supply system replace a bathroom extractor?

Do not assume so. Supply ventilation and extraction have different functions. A bathroom needs an appropriate way to remove moisture-laden air outdoors; discuss how this works alongside your home’s supply ventilation.

Should I choose a 150mm or 200mm inline fan?

Choose according to the complete design, including duct size, required installed airflow, duct length, bends and outlet restrictions. A 200mm fan is not automatically better for an existing 150mm setup.

Does the maximum airflow figure show what I will get at the grille?

No. The product’s maximum airflow figure is not a site measurement. The installed ductwork and fittings affect the airflow delivered in practice.

Can I use the same fan for supply and extraction?

An inline fan moves air in a defined direction, but suitability depends on the exact product and system design. Confirm the intended application, airflow direction, controls and installation requirements before buying.

What information should I send for product advice?

Send the fan model, duct diameter, photos of the existing setup, approximate duct length, number of bends and whether you need bathroom extraction or whole-home supply ventilation.

Find the right ventilation components with Super Cell

Explore the highlighted product links above to compare fans, ducting, diffusers and supply systems. For help narrowing down the options, email info@supercell.co.nz with your measurements and photos. Getting the application clear first makes it easier to choose components that belong together.

Bathroom ventilation, bathroom vents, diy home ventilation, Extraction fans, extraction vents, Inline fans, Supply ventilation, supply vents, Ventilation ducting, ventilation vents
Prev Post HRV Filter Replacement for Taranaki & Waikato Homes
Next Post Ventilation Filters, Fan Motors & Plug & Go Systems for Rodney & North-West Auckland

STAY CONNECTED

GET
THE LATEST
DEALS!

supercellnz
We specialise in Heat Pumps,
Ventilation systems, HVAC
Cleaners and ventilation
filter replacements.

Filters

  • HRV
  • DVS
  • AMS
  • Super Vent
  • Moisture Master
  • Sayr
  • Smartvent
  • I-Vent

Accessories

  • HVAC Cleaners
  • Diffusers and Ducting
  • Nitrile single use gloves
  • Duct joiners
  • y-branch & Splitters
  • Cavius Fire Alarms
  • water filters

Store

Penrose
Auckland, New Zealand

P: 021 055 1400
E: info@supercell.co.nz

© 2017 SUPERCELL NZ All rights reserved
 

 

IN STOCK OUT STOCK PRODUCT VENDOR :
  • 100% Genuine Buffalo Vintage Wash Leather
  • 100% Cotton Lining
  • 2 front flap buckle pockets
  • 2 side flap buckle pocket
  • 35cm in height, brass metal fittings
  • Adjustable strap, lightweight, durable leather
  • Tanned without the use of chemical.
     

    Has been added to the cart!

     

    Has been added to the wishlist!